Just about all of today's digital cameras are capable of recording video. Most are also capable of taking very good quality HD video. But a similar problem arises for most people in that it's not easy to view those video clips. Many would like to combine them to single playable videos, but don't know how. Similarly many others would like to create their own YouTube videos, but also don't fully understand where to start. This site's tutorials are intended to help those people. ONLY FREE SOFTWARE are used in these tutorials. That way, the average person can get started and try what they've learned immediately.

VIDEO EDIT BLOG SEARCH

Use the below search engine to narrow your search within the blog. And don't forget to also visit our YouTube channel!
Custom Search
TRANSLATOR TRADUCTOR अनुवादक TRADUCTEUR TAGASALIN ÜBERSETZER

TRANSLATOR TRADUCTOR अनुवादक TRADUCTEUR TAGASALIN ÜBERSETZER

Sunday, June 2, 2013

Video Stabilization

Do people often comment that your videos make them sick to the stomach?  Well then, the problem might not be just the content of your videos (although it might).  When taking hand-held video, it's extremely important to try to keep the camera as steady as possible to prevent overly shaky videos that may make the average person seasick.  

Do your videos do this (click here) to people?


One way to help mitigate such shaking is to use a stabilizing rig (a.k.a "Steadicam").  There are many options for such a rig.   Some include gyros, and/or counterbalancing weights. Although effective, such rigs can be quite costly for the average person to afford.   A much simpler (cheaper) method is to use what's called a two-handed stabilizing rig.  It's simply a camera mount that allows two handed steadying of the camera.  Also the rig is designed to increase the distance from the hands to the camera to mitigate the effects of hand shake.     

Director Sam Raimi used such a rig filming his 1981 movie "Evil Dead".  His rig was simply a two-by-four board with a 16mm camera strapped to the middle.  It required two people to hold the rig, one on each end of the board.  They would then run to the film's characters, keeping the rig/camera close to the ground.  The effect of such technique can be seen in this clip from the movie (especially watch toward the end of the clip).  There's still some camera shake, but the end result is pretty effective.  

Filmed with a 2" x 4" (no-kidding!)


You can build an easy to use single-person rig by using your own imagination.  Keep in mind that your rig should include two-handed grip, and some distance between the camera and your hands.  Here's an example, built from PVC pipe and fittings.  It costs less than $5 materials, and is extremely easy to build.  I've built one of these for myself, and really like it.  No PVC gluing is required as the pieces/fittings hold together well by friction alone.  As such, you can easily disassemble it and take it with you on travel.  

Build your own Stabilizing Rig for $5


Most camera's today also include built-in image stabilization.   These stabilizers are most effective for still photography.  Video hand shake normally exceeds the capability of these stabilizers for video.   But when used in combination with a stabilizing rig (such as the above), video shake can be greatly reduced.

Don't expect miracles with a stabilizing rig.  You'll still need to concentrate on steadying the camera as much as possible through your hand movement, and also through your feet movement.  Try holding your arms with a 90 degree bend at the elbow.  Also imagine that you're balancing books on your head when walking with the camera.

If all of the above fails, and you still end up with shaky video, your next option is to consider software stabilization.  Most low-end or free video editors (including the ones listed on this site) do not have such capability.  Additionally, software stabilization can be extremely tasking on your computer's abilities, taking hours to achieve for slower computers with limited RAM.  

Surprisingly, YouTube includes a free video stabilizing capability for your uploaded videos.  But it must be manually selected.  Instead of using your computer, you can use the YouTube server computer to conduct stabilization of your videos.  It will still take time to complete the stabilization.  But you can conduct simultaneous stabilization of multiple videos.  If desired, you could also use a video downloader (such as Freemake listed on this site) to download your final stabilized video back to your computer.

How-to-Do Video Stabilization with YouTube

Step 1: Upload your video to YouTube (I'll assume most of you know how to do that).

Step 2: Click on your YouTube name in the upper-right corner of the screen, and select "Video Manager".

Step 3: Find your video in the list, and click on the "Edit" arrow or button.

Step 4: Select "Enhancements" 

Step 5: In the upper-right corner of the editing window, select "Stabilize".  Please note that

Step 6: Final important step.  Click on "Save" directly above "Stabilize".

Please note that your YouTube video will not be stabilized immediately.  As mentioned, stabilization is an intensive process, even for the YouTube servers.  YouTube will include a banner with your video stating that it's being editing.  In the meantime, the original video will be shown until the process is completed.  Come back later (give it a half-hour at least) to see your stabilized video.  If you don't like the final result, you can always select "Revert back to original video".

Here's an example of shaky video (watch fulls screen):

And here's that same video after YouTube stabilization. Impressive, huh?


16 comments:

  1. That is interesting, my Brother is into video editing in Las Vegas NV but I never really payed attention, but I finally saw how cool it could actually be, are there free or cheap programs that help with editing and possibly even putting a collage of videos together? just some simple family pictures and videos for a family reunion on my Wife's side.

    ReplyDelete
    Replies
    1. Yes there are many. But I recommend FileLab, Freemake, and VSDC as some of the better ones that are currently available. Look for "Popular Posts" in the right column of this blog. Then please click on "Basic Video Editing (Cutting & Joining) for more info on these programs.

      Delete
  2. Thanks for sharing tips on how to edit the videos as this is really a tough task and need a lot of effort. Please keep on posting some new editing features as these really help.

    Posted by | Product Videos

    ReplyDelete
  3. Thanks for these tips. You people may also take help from an after effects templates to make your work more effective and efficient. These are more impressive and help you in making eye-catching introduction.

    ReplyDelete
  4. its really good. it working better. if need new and updated full version software just visit Free Software

    ReplyDelete
  5. Great blog about video editing. If you want to make good videos please contact us from the links below

    Seek the help of social media marketing video or all kinds of suitable marketing and professional videos that can make your business popular one for the purpose. There are some amazing new themes as well as solutions provided with kickstarter video Production team who are always striving forward to come up with some amazing new results as well as ideas.

    ReplyDelete
  6. Hello! This post couldn’t be written any better! Reading this post reminds me of my previous room mate! He always kept chatting about this. I will forward this page to him. Fairly certain he will have a good read. Thank you for sharing!
    _________________________
    Total video downloader for Mac free

    ReplyDelete
  7. Nice post Great tips. Thanks for sharing. :)

    ReplyDelete
  8. SELAMAT DATANG DI AGEN JUDI RESMI INDONESIA
    LINK ALTERNATIF
    BALAKQQ
    WALETQQ
    MAXPOKER88
    JPPOKER
    CAHAYA QQ
    MENANG QQ
    selamat bergabung dan semoga beruntung.

    ReplyDelete
  9. that is somethink new for me about video stabilization.. thanks so much..

    ReplyDelete

Please comment on your experience or needs for video editing. I use such input for future blog posts. Also use the comments to contact me, as I read each and every comment. If I don't reply, that means I don't know the answer to your particular question, and hopefully one of the other readers can answer it.